Westward Operating Instructions and Parts Manual
Installation
LOCATION OF THE AIR
COMPRESSOR
Locate the air compressor in a clean,
dry and well ventilated area. The air
compressor pump and shroud are
designed to allow for proper cooling.
The ventilation openings on the
compressor are necessary to maintain
proper operating temperature. Do not
place rags or other containers on or
near these openings.
GROUNDING INSTRUCTIONS
SHOCK. In the event of a short
circuit, grounding reduces the risk
of shock by providing an escape
wire for the electric current. This
air compressor must be properly
grounded.
The portable air compressor is
equipped with a cord having a
grounding wire with an appropriate
grounding plug (see following
illustrations). The plug must be used
with an outlet that has been installed
and grounded in accordance with all
local codes and ordinances.
1.
The cord set and plug with this
unit contains a grounding pin.
This plug MUST be used with a
grounded outlet.
IMPORTANT: The outlet being used
must be installed and grounded in
accordance with all local codes and
ordinances.
Compact Air Compressor
RISK OF
ELECTRICAL
2.
Make sure the outlet being used
has the same configuration as
the grounded plug. DO NOT USE
AN ADAPTER. See illustration.
Plug
Grounding Pin
3.
Inspect the plug and cord before
each use. Do not use if there are
signs of damage.
4.
If these grounding instructions
are not completely understood, or
if in doubt as to whether the
compressor is properly grounded,
have the installation checked by
a qualified electrician.
RESULT IN ELECTRICAL SHOCK.
Do not modify the plug provided. If
it does not fit the available outlet, a
correct outlet should be installed
by a qualified electrician.
Repairs to the cord set or plug
MUST be made by a qualified
electrician.
9- ENG
Model 3JR69
Grounded
Outlets
IMPROPER
GROUNDING CAN