How To Stop; Before Starting; How To Start - Westward 3JR69 Mode D'emploi

Westward Operating Instructions and Parts Manual
On/Off Switch (located on opposite
side of air compressor): Used to
turn air compressor on and off.
Tire Chuck: Adapter for inflating tires.

HOW TO STOP

1. Set the On/Off switch to "OFF".
TO USE TIRE CHUCK
1. Attach tire chuck to hose.
2. See the "How to Start" paragraph
to start air compressor.
3. Place the female tire chuck onto
the tire valve stem of the tire to
be inflated.
4. Slowly increase the pressure
setting of the adjustable pressure
valve to the tire manufacturer's
recommended PSI. Note: To
ensure correct tire pressure use
a tire pressure gauge.

BEFORE STARTING

1. Place On/Off switch to "OFF".
2. Place the adjustable pressure
valve to 10 PSI.
3. Attach hose and accessories.
Compact Air Compressor
On/Off
Switch
11- ENG
hazardous risk of bursting. Check
the manufacturer's maximum
pressure rating for air tools and
accessories. Carefully follow the
"How to Start" instructions.

HOW TO START

1. Place On/Off switch to "OFF".
2. Plug the power cord into the
grounded outlet.
3. Place On/Off switch to "ON" to
start compressor.
4. Check the manufacturer's
maximum pressure rating for the
air tool, accessory, or vehicle tire
being used. The air compressor
outlet pressure must never
exceed the maximum pressure
rating.
5. Slowly increase the pressure
setting of the adjustable pressure
valve. You should be able to
hear and feel air pressure being
relieved by the adjustable
pressure valve. If pressure is not
being relieved, turn the air
compressor off immediately. The
pressure valve must be replaced.
contain water condensation. Do
not spray unfiltered air at an item
that could be damaged. Some air
operated tools or devices may
require filtered air. Read the
instructions for the air tool or
device.
Model 3JR69
Too much air
pressure causes a
Compressed air
from the outfit may