Medel PO01 Mode D'emploi page 37

Weight
Sensor to measure SpO2
Permissible operating conditions +10 °C to +40 °C, ≤75 % relative humidity, 700 –1060 hPa
Permissible storage conditions
Power supply
Battery life
Classification
Technical information is subject to change without notification to allow for updates.
This device complies with European Standard EN60601-1-2 and is subject to
•
particular precautions with regard to electromagnetic compatibility. Please note that
portable and mobile HF communication systems may interfere with this unit. More
details can be requested from the stated Customer Service address or found at the
end of the instructions for use.
This device complies with the EU Directive 93/42/EC concerning medical devices,
•
the Medizinproduktegesetz (German Medical Devices Act) and the DIN EN ISO
80601-2-61 standard (Medical electrical equipment – Particular requirements for the
basic safety and essential performance of pulse oximeter equipment for medical use)
100006_MEDEL OXYGEN PO01_USER MANUAL_REV.00_19.04.2016.indd 37
Approx. 57 g (including batteries)
Red light (wave length 660 nm); infra-red (wave length 905
nm); silicon receiver diode
ambient pressure
-40 °C to +60 °C, ≤95 % relative humidity, 500 –1060 hPa
ambient pressure
2 x 1.5 V AAA batteries
2 AAA batteries last for approx. 2 years of operation at 3
measurements per day (each of 60 seconds).
IP22, application part, type BF
37
10/06/2016 11:25:48