Maintenance / Cleaning - Medel PO01 Mode D'emploi

10. Maintenance/cleaning
IMPORTANT:
o not use high-pressure sterilisation on the pulse oximeter!
D
Under no circumstances should you hold the pulse oximeter under water, as this can
cause liquid to enter and damage the pulse oximeter.
Clean the housing and the interior rubber surface with a soft cloth dampened with
•
medical alcohol after each use.
If a low battery status appears on the display of the pulse oximeter, change the
•
batteries.
If you are not going to use the pulse oximeter for more than one month, remove both
•
batteries from the device to avoid possible leaking.
11. Storage
IMPORTANT:
Store the pulse oximeter in a dry place (relative humidity ≤95 %). If the humidity is too high
it may shorten the service life of the pulse oximeter or damage it. Store the pulse oximeter
in a place where the ambient temperature is between -40°C and 60°C.
12. Disposal
Please dispose of the device in accordance with EC Directive – WEEE (Waste Elec-
trical and Electronic Equipment).
If you have any queries, please contact the appropriate local authorities.
100006_MEDEL OXYGEN PO01_USER MANUAL_REV.00_19.04.2016.indd 34
34
10/06/2016 11:25:48