Contents
GB
1
Operating Elements and Connections . 12
2
3
Applications . . . . . . . . . . . . . . . . . . . . . . . 13
4
Installation . . . . . . . . . . . . . . . . . . . . . . . . 13
5
6
Operation . . . . . . . . . . . . . . . . . . . . . . . . . 14
7
8
DMX Control . . . . . . . . . . . . . . . . . . . . . . 15
9
9.3 Key lock . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
10.1
10.1.3 5-channel mode . . . . . . . . . . . . . . . . . . . 17
10.1.5 8-channel mode . . . . . . . . . . . . . . . . . . . 18
12
All operating elements and connections de-
scribed can be found on the fold-out page 3.
1
Operating Elements
and Connections
1 Mounting brackets
2 Locking screws for the mounting brackets
3 Display
4 Control buttons
Button MENU / ESC to exit a submenu
Buttons
and
change a setting in the menu
Button ENTER to activate the menu item and to
go to the next parameter
5 DMX signal output (3-pole, XLR) to connect the
DMX input of another DMX light effect unit;
Pin 1 = ground, 2 = DMX-, 3 = DMX+
6 DMX signal input (3-pole, XLR) to connect a
light effect unit;
Pin 1 = ground, 2 = DMX-, 3 = DMX+
7 Mains jack for connection to a socket (230 V~ /
50 Hz) via the mains cable provided
8 Support for the mains fuse
Always replace a blown fuse by one of the same
type.
9 Microphone for music control
2
Safety Notes
This unit corresponds to all relevant directives of
the EU and is therefore marked with
WARNING The unit uses dangerous mains volt-
age. Leave servicing to skilled per-
sonnel only and do not insert any-
thing into the air vents! Inexpert
handling of the unit may result in
electric shock.
Please observe the following items in any case:
G
The unit is suitable for indoor use only. Protect it
against dripping water and splash water, high air
humidity and heat (admissible ambient tempera-
ture range: 0 - 40 °C).
G
Do not place any vessel filled with liquid on the
unit, e. g. a drinking glass.
to select a menu item and to
.