Heating Schedule Programming - CHAFFOTEAUX 3318870 Manuel D'instructions

heating schedule programming

GB
The Time program schedule allows for
heating the environment according to
need.
Press OK to set heating schedule pro-
gramming. Turn the knob and select -
Complete menu
Press the OK button.
Turn the knob and select:
- CH settings
Press the OK button.
The display screen shows:
- CH Setpoint temp
- Time program
- Holiday function
- Thermoregulation
Turn the knob and select:
- Time program
Press the OK button.
The display screen shows:
- Free time programming
- Wizard tme programming
- Preset programs
- Time Programming/manual mode
Turn the knob and select:
- FREE TIME PROGRAMMING
Press the OK button.
The display screen shows:
- All zones
- Zone 1
- Zone 2
- Zone 3
Turn the knob and select the zone in
which you wish to apply schedule pro-
gramming:
Press the OK button.
76
Turn the knob and select
- Set Comfort T
Press the OK button.
Turn the knob and adjust the room tem-
perature value during the comfort period
(the temperature value will fl ash on the
display).
Press the OK button to confi rm.
Turn the knob and select:
- Set Reduced T
Press the OK button.
Turn the knob and adjust the room tem-
perature value during the reduced pe-
riod (the temperature value will fl ash on
the display).
Press the OK button to confi rm.
Turn the knob and select:
- Set time program
Press the OK button.
Turn the knob and select the day or days
of the week you wish to program.
Every time a day is selected, press the
OK button to confi rm.
The days selected for programming ap-
pear on the display in a box.
Turn the knob and select save. Press the
OK button and turn the knob to set the
start of the heating period correspond-
ing to the fl ashing value. Press the OK
button to confi rm.
Press the OK button and turn the knob
to set the end time of the comfort period.
If you want to add new time periods, turn
the knob and select Add period; press
the OK button.
Repeat the above procedure to set the
start and end times for each comfort pe-
riod added.
Once programming is complete, turn the
knob and select Save.
Press the OK button to confi rm.