display settings
GB
Press the OK button to confi rm.
Turn the knob and select summer
time, press the OK button, select auto
or manual, press the OK button.
Press OK to confi rm the choice, and
press the back button "
the previous screen.
Turn the knob and select:
- Home screen
When setting the main page it is pos-
sible to choose the information visua-
lised.
By choosing the "Customizable" view
mode, it is possible to select all the
desired information. Alternatively, it
is possible to choose from one of the
following pre-confi gured view
Base
Active sources
CO2 saving (where present)
Customizable
Boiler base (only viewable with room
probe excluded)
Boiler complete (only viewable with
room probe excluded)
Solar (where present)
Zone (where present)
FWS (where present)
HP system (where present)
Press OK to confi rm the selection. Press
the back button "
previous visualisation.
72
" to return to
modes:
"to return to the
Turn the knob and select:
- Brightness in standby
use the knob to adjust the brightness
of the display during standby periods.
Press the OK button to confi rm.
Turn the knob and select:
- Backlight
use the knob to set the time for which
the display backlight remains on after
the last time the system interface was
used and has remained inactive for a
certain period of time.
Press the OK button to confi rm.
Turn the knob and select:
- Home screen timing
use the knob to select the time pe-
riod for which the main screen is dis-
played.
Press the OK button to confi rm.
Press the back button "
the previous screen.
" to return to