Team Orion advantage one Mode D'emploi page 21

The LCD screen displays error messages when certain defects are detected. Refer to the table below for more infor-
mation.
NOTE: Different types of defects can result into the same error message being displayed. We cannot guarantee that
the indication on the screen and the proposed solution are always appropriate.
ON SCREEN MESSAGE
POWER SUPPLY HIGH VOLTAGE
POWER SUPPLY LOW VOLTAGE
NO BATTERY CONNECTED
BATTERY CELL ERROR
BATTERY POLARITY INVERSION
DEFECTIVE BATTERY
BALANCE ERROR
BATTERY VOLTAGE TOO HIGH
BATTERY VOLTAGE TOO LOW
CHECK BATTERY CONNECTION
BATTERY TYPE ERROR
www.teamorion.com
TROUBLESHOOTING
MEANING / SOLUTION
Input voltage too high. Check external power supply voltage.
Integrated power supply defective
Input voltage too low. Check external power supply voltage.
Integrated power supply defective
Check battery and connections
Check battery and cell number setting
Check battery connections and polarity
Defective battery, cell unbalance 0.5V or more
No balancing connector detected or balancing polarity/connection problem
Battery voltage higher than safety threshold. Check battery and/or settings
Battery voltage lower than safety threshold. Check battery and/or settings
Check battery and connections
NiMH/NiCd battery type selected but a LiPo/LiFe battery with balancing
connector is connected to the charger. Check battery and/or settings
English - 21