Safety Precautions - OHAUS Traveler TA152 Manual D'instructions

™
Traveler Scales
1. INTRODUCTION
This manual contains installation, operation and maintenance instructions for the Traveler
Scales. Please read the manual completely before using the scale.

1.1 Safety Precautions

Please follow these safety precautions:
•
Verify that the Power Adapter input voltage matches the local power supply voltage.
•
Use the scale only in dry locations.
•
Do not operate the scale in hostile environments.
•
Do not drop loads on the pan.
•
Do not place the scale upside down on the pan.
•
Service should be performed only by authorized personnel.
1.2. Controls
Key Name
On-Zero
Off
Yes
Print
Cal
Figure 1-1. Controls.
TABLE 1-1. CONTROL FUNCTIONS
Function
• Primary function (Short Press) – If scale is Off, turn On. If
scale is on, perform Zero/Tare function
• Secondary function (Long Press) – Turn scale Off
• Menu function – (Yes) This key is used to accept the currently
displayed setting
• Primary function (Short Press) – Send the current display
value to serial port if installed
• Secondary function (Long Press) – Starts Span calibration as
available in Menu
EN-1