Tanning With Creams; Before You Use Your Lumea; Pretreating Your Skin; Skin Test - Philips Lumea BRI864 Mode D'emploi

Tanning with creams

Before you use your Lumea

Pretreating your skin

Skin test

22_100_5515_2_DFU-Luxury_A6_v3.indd 17
If you have used an artificial tanning lotion, wait
until the artificial tan has disappeared completely
before you use the device.
Before you use Lumea, you should pretreat your
skin by removing hairs on the surface of your skin.
This allows the light to be absorbed by the hair
parts below the skin surface to ensure effective
treatment. You can either shave, short-trim, epilate
or wax. Do not use depilatory creams, as chemicals
may cause skin reactions.
If you choose to wax, please wait 24 hours before
using Lumea to let your skin rest. We recommend
that you take a shower before the treatment to
ensure that all possible residue of wax has been
removed from your skin.
1 Pretreat the areas you intend to treat with
Lumea.
2 Clean your skin and make sure it is hair-free,
entirely dry and free from oily substances.
Note: if shaving causes skin irritation, we advise
you not to use the device until skin irritation is
resolved.
When you use Lumea for the first time or after
recent tanning, perform a skin test on each area
to be treated. The skin test is necessary to check
your skin's reaction to the treatment and to
determine the correct light intensity setting for
each body area.
17
English
23/06/16 10:15