NOMA 052-4345-2 Guide D'utilisation page 12

Toll-free: 1-866-827-4985 · model nos. 052-4345-2/052-6934-8
While connecting wires, make sure to:
Match up the wires first.
Hold the bare metal leads together and twist until tight.
Insert the twisted ends into a wire connector and turn the wire connector until tight (fig. 18).
After all connections are done, turn the splices upward and push them carefully upward through
the mouting bracket into the outlet box.
Spread the wires apart so that the green and white wires are on one side of the outlet box and the
black and blue wires are on the other side of the outlet box.
Warning!
Be sure no bare wire or wire strands are visible after making connections.
Note: The silver cord is only a safety cable (fig. 19).
You can wrap it over the mounting bracket and
loop it into the hook on the mounting bracket or
alternatively, secure it to the ceiling, using the
provided short wood screw and lock washer.
5. Fan Assembly to Mounting Bracket
Hold the fan assembly by the canopy and
raise it to align the holes in the canopy
with the holes in the mounting bracket.
Diagonally apply two sets of side screws
with lock washers to the mounting brcket.
Do not tighten the side screws at this stage.
Hang the two "L" slots of the canopy on
the mounted side screws (fig. 20).
Diagonally apply another two sets of side
screws with lock washers. Tighten all the
side screws properly.
Canopy