Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EXTENSION CORDS
USE PROPER EXTENSION CORDS.
MAKE SURE YOUR EXTENSION CORD IS IN GOOD
CONDITION AND IS A 3-WIRE EXTENSION CORD
WHICH HAS A 3-PRONG GROUNDING TYPE PLUG
AND MATCHING RECEPTACLE WHICH WILL
ACCEPT THE MACHINE'S PLUG. WHEN USING AN
EXTENSION CORD, BE SURE TO USE ONE HEAVY
ENOUGH TO CARRY THE CURRENT OF THE
MACHINE. AN UNDERSIZED CORD WILL CAUSE
A DROP IN LINE VOLTAGE, RESULTING IN LOSS
OF POWER AND OVERHEATING. FIG. D-1 SHOWS
THE CORRECT GAUGE TO USE DEPENDING ON
THE CORD LENGTH. IF IN DOUBT, USE THE NEXT
HEAVIER GAUGE. THE SMALLER THE GAUGE
NUMBER, THE HEAVIER THE CORD.
FOREWORD
The Delta DP300L 12" Drill Press comes with a flexible work lamp, a laser guide for precise drilling and a utility tray for
keeping tools within easy reach. This machine has a tilting table for angle drilling and side edges and parallel slots for
fast workpiece clamping.
NOTICE: The photo on the manual cover illustrates the current production model. All other illustrations contained in the
manual are representative only and may not depict the actual labeling or accessories included. These are are intended
to illustrate technique only.
FUNCTIONAL DESCRIPTION
MINIMUM GAUGE EXTENSION CORD
RECOMMENDED SIZES FOR USE WITH STATIONARY ELECTRIC MACHINES
Length of
Ampere
Rating
Volts
0-6
120
0-6
120
0-6
120
0-6
120
6-10
120
6-10
120
6-10
120
6-10
120
10-12
120
10-12
120
10-12
120
10-12
120
12-16
120
12-16
120
12-16
120
GREATER THAN 50 FEET NOT RECOMMENDED
8
Total
Cord in
Gauge of Extension
Feet
Cord
up to 25
18 AWG
25-50
16 AWG
50-100
16 AWG
100-150
14 AWG
up to 25
18 AWG
25-50
16 AWG
50-100
14 AWG
100-150
12 AWG
up to 25
16 AWG
25-50
16 AWG
50-100
14 AWG
100-150
12 AWG
up to 25
14 AWG
25-50
12 AWG
Fig. D-1
Publicité
Table des Matières
