How To Operate; Zoom Function - SVAT Clearvu Q1204 Manuel D'instruction

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

1.
Turn the unit on by pressing in the button marked POWER. You may encounter a buzzing noise
when powering up. The system just reminds you that you have unused channels (no camera
connected)
2.
FULL SCREEN MODE:
- Pressing CH1 - 4 key will display the desired channel in full screen
- Press MODE key to go back to QUAD mode (FIG-2)
3.
PIP MODE:
- Press MODE key once will go to PIP1 mode (FIG-3)
- Press MODE key twice will go to PIP2 mode (FIG-4)
- Press MODE key three times will go back to PIP1 mode (with auto switching)
- Press MODE key four times to go back to the main QUAD screen (FIG-2)
(FIG-2)
4.
DEFINING PIP CHANNELS:
- When in PIP1/PIP2 mode press and hold MODE key for 2-3 seconds, channel name should
start blinking
- Press CH1 or CH2
- Press CH3 or CH4
windows by pressing
- Press MODE key again to save settings and quit
5.

ZOOM FUNCTION:

*Performed in QUAD/PIP1/PIP2/FULL screen mode:
- Press the ZOOM key, a ZOOM window appears
- Press the
key to adjust the position of the ZOOM window
- Press the ENTER key to zoom in the selected area
- Once zoomed in you can still adjust the area by using the
- Press the ZOOM key again to zoom out
6.
FREEZE FUNCTION:
*Performed in QUAD/PIP1/PIP2 screen mode:
- Press the FREEZE key, F1234 is displayed in the top left corner
- Press the CH1 - CH4 keys to freeze the desired camera.
- Pressing the same CH key will unfreeze it
- Press FREEZE again to unfreeze all cameras
*Performed in FULL screen mode:
- Press the FREEZE key, F1234 is displayed in the top left corner
- Press FREEZE again to unfreeze current camera
7.
AUTO SWITCHING FUNCTION:
- Press the AUTO key, signal will automatically switch between QUAD-CH1-CH2-CH3-CH4-QUAD
- Press the MODE key to disable auto switching and go back to QUAD mode
(Time delay can be adjusted in SYSTEM SETUP, see below)

HOW TO OPERATE

key to select different picture for CHANNEL 1
to switch left and right and you can change the image for the PIP
key
w w w . s v a t . c o m
(FIG-3)
6
(FIG-4)
key

Publicité

Table des Matières
loading

Table des Matières