Ega Master 57541 Manuel D'instructions page 26

5. PEAK HOLD MODE OPERATION
Note :
1. If appears, that means this wrench has ever been applied over than 110% of torque of
the spec.
2. If appears, that means the wrench's memory is full and the next value record can
not be written in. Please refer the "Peak Hold Mode Recorded Value Review" section to clear the
momory data.
3. The green LED will be on for 80%, 85%, 90%, 95% and 97.5% of maximum setting torque.
4. The red LED will be on for 100% of maximum setting torque.
26