Ega Master 57541 Manuel D'instructions page 25

4. TRACK MODE OPERATION
Note:
1. If is appears, that means this wrench has ever been applied over than 110% of torque
of the spec.
2. When using track mode, if you apply torque over 5 N-m, the LCD display will start to display
the torque value. If the applied torque is less than 5 N-m, the LCD display does not change the
value aplied before. The smallest torque for 62955 and 62959 is 0.5N-m.
3. The green LED will be on for 80%, 85%, 90%, 95% and 97.5% of maximum setting torque.
4. The red LED will be on 100% of maximum setting torque.
25