Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Caution!
The Pixo C2 USB connector can not be used for data
transfer. It is only a power connector with a limited
output power. The maximum ratings are 5.3 V with 500
mA. This output power is not suffi cient for devices with
a built-in hard disk drive. Hard disk drive based devices
have a peak power consumption of more than 1000 mA.
LED functions
The green LED indicates only the NiMH / NiCd and Li-Ion
charge process. It does not indicate any activity on the
USB power connector.
C H A R G E
green
Off
Flashing
On
Off
Flashing
P O W E R
red
Off
On
On
On
Flashing
No or faulty power supply.
Charge process is going on.
Battery fully charged.
Main power from power supply
or car cigarette lighter plug ok.
No battery pack inserted. Faul-
ty contact. Wrong or faulty bat-
tery pack.
Charge process was stopped by
10 hours safety timer.
Battery pack could not be fully
charged. Battery pack faulty.
Process error. Remove batte-
ries and try again.
Publicité
Table des Matières
