PIXO C2 Mode D'emploi page 18

Mobile Phone and USB charge function
• The charger comes with a special USB Mobile Phone
Charge Cable with adapters for the most up-to-date
mobile phones from Nokia, Sony Ercisson, Motorola and
Samsung.
• All other devices are charged via generic USB cable.
• The charging process is controled by the circuit of the
external device and it is possible to charge different bat-
tery technologies. The charging states are shown on the
external device. The charging time depends on the exter-
nal device. It is not possible to indicate any charging time
for these external devices.
• USB output rating: 5.3 VDC maximum 500 mA
Generic technical specifi cations
• LEDs for visual indication of Li-Ion, NiMH or NiCd char-
ge process
• Compact and light base unit with 125 x 65 x 27 mm and
85 grams
• Worldwide home use via the ultra light and compact 100-240
V switch mode power supply with 12 VDC 1200 mA
• Mobile use via 12V car cigarette lighter plug
Scope of supply (what is in the box)
Base Unit, Power Supply, Car Cigarette Lighter Plug, USB
Mobile Phone Charge Cable with 8 Adapters, Users Manual
Charging process
Please connect the power supply or the car cigarette
lighter plug to the charger. The charger is ready to use
when the red Power LED is on. You can charge 1-2 NiMH
/ NiCd batteries or one Li-Ion battery pack.