Safety Guidelines - CyberPower CPS3000 Mode D'emploi

1. Safety Guidelines

(Please read through this manual before assembling Inverter)
• A readily accessible disconnect device shall be incorporated external to the equipment.
• Risks of electrical shock and dangers. All malfunctions or failures should be examined by
qualified technician. Please do not remove the case of the inverter by yourself!
• Please do not install the inverter in places with high moisture or near the water.
• Please do not install the inverter in places with high ambient temperature or with direct
exposure to sunlight.
• After connecting the AC input of the inverter to the utility, the AC outlet of the inverter will have
the AC output even if the power switch on the front panel is OFF.
• Please only connect batteries with the same brand and model number in one battery bank.
Using batteries from different manufacturers or different capacity is strictly prohibited!
• Please keep batteries away from fire or heat source as batteries may generate flammable
gases during normal operation.
• Make sure the air flow from the fan is not obstructed at both sides (front and back) of the
inverter. (Please reserve at least 15cm of space)
• Please do not stack any object on the inverter.
Warning :
Batteries will have aging problem after years of operation.
It is recommended to do the regular maintenance of the batteries every year.
Once aged, the batteries should be replaced by professional technician to prevent
the dangers of fire or explosion.
EN
1