Getting Started - SPOT X Guide De Démarrage Rapide

™
SPOT X
SPOT X requires an active SPOT Service Plan.
!
S.O.S. WILL NOT WORK WITHOUT ACTIVATION.

GETTING STARTED

2
1
CONFIGURE
1. 1.
Fully charge your SPOT X after Activate your new SPOT X:
unboxing. FindMeSPOT.com/activate
2.
Power on your new SPOT X.
NEW SPOT CUSTOMERS:
Begin Activation.
3.
Follow onscreen instructions to
configure your device.
EXISTING SPOT CUSTOMERS:
using username & password.
4.
Your ESN and Authorization
2.
Code will be displayed for Follow onscreen instructions
reference during activation. to complete activation.
3.
Download the SPOT X Updater:
Your ESN and Authorization
FindMeSPOT.com/
Code can also be found by
SPOTXBSupport
selecting System Settings >
SPOT X Info.
4. Follow onscreen instructions to
update firmware and sync.
For more information on how to use your new device, refer to the SPOT X User Guide
located at: FindMeSPOT.com/SPOTXBUserGuide
QUICK START GUIDE
SPOT X
ACTIVATE & 3
CONNECT
UPDATE FIRMWARE
1.
Install the SPOT X App from
your mobile device app store.
2.
Select Enable Bluetooth on your mobile
device (SPOT X's Bluetooth is
always discoverable).
Login
3.
Place the SPOT X and the
mobile device within 10 feet
(3 meters) of each other.
4. On your mobile device, open the
SPOT X App.
5. Login using your SPOT My
Account username & password.
6. Select your SPOT X
(ex: SXB2970000).
TEST YOUR SPOT X
1. Go outside where there is a clear
view of the sky and no obstructions.
1
RESTRICTED
VIEW
MAY NOT FUNCTION PROPERLY
2. Power on.
3. Point the antenna towards the sky.
4. On your mobile device, open the SPOT X App.
5. Select your SPOT X (ex: SXB2970000).
6. Select .
7. Select to create a new message.
8. Enter and select a contact.
9. Type a test message.
10. Select to send.
11. Verify the message was received.
See the Important Safety & Product Information Guide in the SPOT X box
for product warnings and other important information.
CLEAR
VIEW
CORRECT
3
2