Viking VDW302 Mode D'emploi page 8

Rack Adjustments
Removable Third Rack
The removable third rack is designed for small dishes, or long dishes that cannot
fi t into the cutlery basket.
Thanks to the easy take-out feature, it allows removing the dishes from the
machine together with the rack after washing operation. Since it can fi t into all standard
size drawers, there is no need to remove the dishes from the basket and place them
separately into the kitchen drawers or shelves.
If you don't want to use the removable third rack, pull it back to yourself to
remove it from the machine, rotate the rail lids A towards outside and pull them
towards yourself to take them out. After taking out the rack by lifting it up, remove the
carrier part from the rails by pulling it towards yourself. Replace the rail lids and push them
back to seat them into their places. Turn the rails inside the machine outwards B to seat
them properly in their places.
In order to put the removable third basket back into its place, repeat the same
process in reverse order.
Lower Rack
Use the lower rack for plates, bowls, pots, etc.
• Fold the shelf upwards A.
• Positioning at the desired height B.
• Fold the shelf again downwards C.
Adjustable Lower Rack Tines
The six piece foldable tines (A) located in the lower rack of the machine are designed for an easier placement of large pieces such
as pans, bowls, etc. You can create larger spaces by folding each tine individually or all of them at once. To bring the adjustable
tines into horizontal position, grab the tines from mid position and push them in the directions of arrows (B) To bring the tines
back to vertical position, just lift them up. Adjustable tines will click into the latch again.
NOTICE
Bringing the tines to the horizontal position by holding them
from the tips may cause them to bend. Therefore, adjust the
tines by holding them by their stems and pushing in the
direction of arrow.
4
3
5
6
When fi nished, test to ensure that the spray arm can still
move freely.
8
NOTICE