Features - Viking VDW302 Mode D'emploi

Warnings & Safety
• Only connect the dishwasher to the power supply when all installation and plumbing work is complete.
• DO NOT install or store the dishwasher where it can be exposed to below freezing temperatures or exposed to weather.
• Dishwasher must be secured to adjacent cabinetry using the brackets provided. Failure to do this may cause damage to property
or bodily injury.
• Connect to a properly rated, protected and sized power supply circuit to avoid electrical overload. The dishwasher is designed for
an electrical supply of 120V (volts), 60Hz (hertz), AC, connected to a dishwasher-dedicated, properly grounded electrical circuit
with a fuse or breakers rated for 15 amperes. Electrical supply conductors shall be a minimum of #16 AWG copper wire rated at
167°F (75°C) or higher. These requirements must be met to prevent injury and machine damage. Consult a qualifi ed electrician if
in doubt.
• DO NOT use any extension cord or portable outlet device to connect the dishwasher to a power supply.
• Remove the dishwasher door when removing an old dishwasher from service or discarding it. Ensure that the dishwasher
presents no danger to children while being stored for disposal.
• Old appliances may contain materials that can be recycled. Please contact your local recycling authority about the possibility of
recycling these materials.

Features

3 Series
1
2
3
4
5
6
7
1 Series
1
2
3
4
5
6
7
12
8
9
10
11
13
1. Upper rack
2. Upper spray arm
3. Salt container (select models)
4. Cutlery basket
8
5. Detergent dispenser
6. Door
9
7. Control panel
10 8. Guiding track for the upper rack
9. Lower spray arm
11
10. Filters
11. Lower rack
12. Model and Serial Tag
12
5
1. Upper rack
2. Upper spray arm
3. Salt container (select models)
4. Cutlery basket
5. Detergent dispenser
6. Door
7. Control panel
8. Guiding track for the upper rack
9. Lower spray arm
10. Filters
11. Lower rack
12. Removable third rack
13. Model and Serial Tag