Listening To The Radio - Teac TC-X350i Mode D'emploi

1
Select "FM RADIO" or "AM RADIO" using the SOURCE
button.
< You can also select "FM RADIO" or "AM RADIO" by pressing the
TUNER button on the remote control unit once or twice.
2
Select the station you want to listen to.
Auto selection
more than 1 sec.
Hold down the TUNING (m/,) button for more than
1 seconds. The unit starts searching for a station.
When a station is tuned in, the tuning process will stop
automatically.
Repeat this step until the station you want to listen to is found.
< If you want to stop the tuning process, press the TUNING button
briefly.
Manual selection
Press the TUNING (m/,) button.
The frequency changes by a fixed step.
Press repeatedly until the station you want to listen to is found.
24

Listening to the Radio

Hold down
FM MODE
When the source is "FM RADIO", pressing the FM mode button
alternates between the Auto (Stereo) mode and Mono mode.
Auto Mode
"AUTO MODE" appears on the display.
FM stereo broadcasts are received in stereo.
Mono Mode
To compensate for weak FM stereo reception, select this mode.
"MONO MODE" appears on the display.
Reception will now be forced to monaural, reducing unwanted
noise.
If the reception is poor
For the best reception, rotate the FM antenna or AM antenna until
you get stations clearly.