Instrument reading command
This command causes the previously selected instrument reading and then the transmission of the
value to the RS232 port.
Command format:
Character
Decimal
Hexadecimal
When an instrument has been selected, the transmission of its value can also be triggered through
the external trigger input (foot switch) or with the instrument « transfer » key.
Values are transmitted according to the format described chapter 8
Error messages
When a requested reading is impossible, an error message is transmitted according to the
following format : Nxy:Ex
9.
GOING BACK TO THE MULTIPLEXED MODE
This command reset the Mux in the multiplexed mode (as when it is switched on).
The Mux does not answer this command.
C
L
Commands: @*R
R
F
APPENDIX A
10.
ONE YEAR LIMITED GUARANTEE FOR Mux2, 4, 8 PARTS
MANUFACTURER'S RESPONSIBILITY
SPARE PARTS AND LABOUR.
The manufacturer commits himself to pay for repair or replacement costs (labour costs included)
during a period of one year as from the date the guarantee came into force. The spare parts can
be new or renovated and are guaranteed until the end of the initial guarantee period.
FIRST END-USER COVERAGE.
This guarantee applies only to the first end-user of the product and is not assignable to any other
subsequent purchaser or user.
RESTRICTIONS.
Any accessory or expansion item not included in the original factory packaging is not guaranteed.
The present guarantee does not cover: installation or repair costs, damages resulting from
circumstances beyond the manufacturer's control like damages following acts of God, misuse, or
careless mistake from the user, damages during the transport or due to a wrong installation, use or
application, such as any material damage caused by the use of non supplied products,
components or accessories. It also does not cover products modified without any written approval
@ or Esc
64 or 27
40 or 1B
C
L
Error code : E1= communication ; E3= reading
R
F
C
L
or Esc*R
R
F
*
L
42
76
2A
4C
D
CR
68
13
44
0D
GB
LF
10
0A
Page 15