Metro Mux2 Mode D'emploi page 12

GB
BEFORE USING THE MULTIPLEXER, PLEASE READ THE SAFETY RULES IN THE
1. WARNING
The information contained in this document can be modified without notice.
The manufacturer does not give any guarantee regarding the guarantees for commercial quality of
this material or for its ability to fit to a particular use.
The manufacturer is not responsible for the eventual errors to be found in this manual and is also
not responsible for the direct or indirect damage resulting from the equipment, from the
performances and from the use of this product.
We did our best to write a most precise possible manual. However, if you find any error in this
guide, please feel free to contact the company Metro.
2. CLEANING
Use a soft cotton cloth slightly soaked with an ethyl alcohol based product.
DO NOT USE the following products: acetone, benzene, toluene and halogen hydrocarbons.
3. PRESENTATION
The Mux2,4,8 multiplexer for instruments enables the communication between 1 to 8 instruments
and a computer or a similar device equipped with a RS232 type interface.
The computer can so make the data acquisition from the different instruments.
The instruments with the brand name Mitutoyo such as those having an « Opto RS duplex »
interface can be connected equally.
4. BASIC TECHNICAL DATA
One RS232 port (9-pin socket) for connection to a computer
One external release input (pedal or contact)
Low voltage supply (7.5 V=) through external mains adaptor
Consumption: 2.5 VA
Storage temperature: - 40 °C to + 70 °C
Operating temperature: 0 °C to + 45 °C
Maximum relative humidity: 80 %
Mitutoyo or Opto RS duplex inputs
Dimensions: width, height, depth in mm
Weight
Page 12
APPENDIX B VERY CAREFULLY
Mux2 Mux4
2 4
57*35*68 106*35 *68
100 g 165 g
Mux8
8
106*44*68
235 g