Samsung DMT610 Série Mode D'emploi page 10

setting up your dishwasher
5
CYCLE
5
SELECTOR
CANCEL &
6
DRAIN
POWER
7
You can select options (Delay start, Sanitize) before starting a cycle. If you change the cycle after
selecting an option, the original cycle is reset.
10_ setting up your dishwasher
DMT610_DD68-00085A-02_EN_20120921.indd Sec3:10 DMT610_DD68-00085A-02_EN_20120921.indd Sec3:10
6
Select the appropriate wash cycle depending on the soil level of your
dishes. After you select a cycle, the Cycle On light for that cycle lights up.
If you want to cancel the selected cycle, press the selected cycle button
again.
To cancel a cycle currently running and drain the dishwasher, hold down
both the Heavy and Delicate buttons for three (3) seconds.
When you press the Power button, the entire display turns on and off, and
then the light of the most recently fi nished cycle lights up.
When the cycle you selected has fi nished, all other indicator lights are
turned off and the "Clean" light is illuminated for 10 minutes (See p. 11).
Then, the Power turns off automatically.
7
2012-09-21 2012-09-21 2:03:38 2:03:38