Maytag MVW18MNAWW Instructions D'installation page 17

ELECTRONIC CONTROLS SET-UP INSTRUCTIONS
CODE
OPTIONS TO USE IF SPECIAL PRICING IS SELECTED:
3.04 NORMAL Special Cycle Vend Price - Increase or decrease
between 0 and 200 by pressing the LEFT UPPER or RIGHT UPPER
NORMAL
key pad. Factory preset for 4 quarters = $1.00.
PR/PN MODELS ONLY: Factory preset for 0 quarters (Free Vend).
3.04 DELICATES Special Cycle Vend Price - Increase or decrease
between 0 and 200 by pressing the LEFT UPPER or RIGHT UPPER
DELICATES
key pad. Factory preset for 4 quarters = $1.00.
PR/PN MODELS ONLY: Factory preset for 0 quarters (Free Vend).
3.04 POWERWASH Special Cycle Vend Price - Increase or decrease
between 0 and 200 by pressing the LEFT UPPER or RIGHT UPPER
POWERWASH
key pad. Factory preset for 4 quarters = $1.00.
g Press the LEFT MIDDLE key pad once to advance to next code.
5.00 TIME-OF-DAY CLOCK, MINUTES
5.00 This is the TIME-OF-DAY CLOCK, minute setting; select between
0 and 59 minutes by pressing the LEFT UPPER or RIGHT UPPER
key pad.
g Press the LEFT MIDDLE key pad once to advance to next code.
6.00 TIME-OF-DAY CLOCK, HOURS
NOTE: Uses military time or 24 hr. clock.
6.00 This is the TIME-OF-DAY CLOCK, hour setting; select between
0 and 23 hours by pressing the LEFT UPPER or RIGHT UPPER
key pad.
g Press the LEFT MIDDLE key pad once to advance to next code.
7.00 SPECIAL PRICE START HOUR
NOTE: Uses military time or 24 hr. clock.
7.00
This is the start hour; select between 0 and 23 hours by pressing
the LEFT UPPER or RIGHT UPPER key pad.
g Press the LEFT MIDDLE key pad once to advance to next code.
8.00 SPECIAL PRICE STOP HOUR
NOTE: Uses military time or 24 hr. clock.
8.00 This is the stop hour; select between 0 and 23 hours by pressing
the LEFT UPPER or RIGHT UPPER key pad.
g Press the LEFT MIDDLE key pad once to advance to next code.
9.00 SPECIAL PRICE DAY
9.10 This represents the day of the week and whether special pricing
is selected for that day. A number followed by '0' indicates no
selection that particular day (9.10). A number followed by an 'S'
indicates selected for that day (9.1S).
Days of the week (1-7) can be chosen by pressing the LEFT
UPPER key pad. Press the LEFT UPPER key pad once to select
special pricing for each day chosen.
When exiting set-up code '9', the display must show current day
of week:
DISPLAY
10
20
30
40
50
60
70
g Press the LEFT MIDDLE key pad once to advance to next code.
EXPLANATION
DAY OF WEEK CODE (selected)
Day 1 = Sunday
Day 2 = Monday
Day 3 = Tuesday
Day 4 = Wednesday
Day 5 = Thursday
Day 6 = Friday
Day 7 = Saturday
CODE
A.00 VAULT VIEWING OPTION
This option is either SELECTED 'ON' or NOT SELECTED 'OFF'.
A.00 Not Selected 'OFF'.
A.SC
Selected 'ON'. Press the LEFT LOWER key pad once for this
selection. When selected, the money and/or cycle counts will be
viewable (depending on what is selected) when the coin box is
removed.
g Press the LEFT MIDDLE key pad once to advance to next code.
b.05 VALUE OF COIN 1
b.05 This represents the value of coin 1 in number of nickels:
05 = $0.25.
By pressing the LEFT UPPER or RIGHT UPPER key pad, there is
the option of between 1 and 199 nickels.
g Press the LEFT MIDDLE key pad once to advance to next code.
C.20 VALUE OF COIN 2
C.20
This represents the value of coin 2 in number of nickels: 20 =
$1.00.
PR MODELS ONLY: Factory preset for $0.25.
By pressing the LEFT UPPER or RIGHT UPPER key pad, there is
the option of between 1 and 199 nickels.
g Press the LEFT MIDDLE key pad once to advance to next code.
d.00 COIN SLIDE OPTION
This option is either SELECTED 'ON' or NOT SELECTED 'OFF'.
d.00 Not Selected 'OFF'.
d.CS Selected 'ON'. Press the LEFT LOWER key pad 3 consecutive
times for this selection.
When coin slide mode is selected, set 'b.' equal to value of slide
in nickels. Set step 6 (regular cycle price) and step 3 (special cycle
price) to number of slide operations. If the installer sets up 'CS' on
a coin drop model, it will not register coins.
g Press the LEFT MIDDLE key pad once to advance to next code.
E.00 ADD COINS OPTION
This option is either SELECTED 'ON' or NOT SELECTED 'OFF'.
This option causes the customer display to show the number of
coins (coin 1) to enter, rather than the dollars-and-cents amount.
E.00 Not Selected 'OFF'.
E.AC Selected 'ON'. Press the LEFT LOWER key pad 3 consecutive
times for this selection.
g Press the LEFT MIDDLE key pad once to advance to next code.
H.00 COOL Temperature Upgrade Price - Increase or decrease between
COOL 0 and 200 by pressing the LEFT UPPER or RIGHT UPPER key pad.
Factory preset for 0 quarters = $0.00.
H.00 WARM Temperature Upgrade Price - Increase or decrease between
WARM
0 and 200 by pressing the LEFT UPPER or RIGHT UPPER key pad.
Factory preset for 0 quarters = $0.00.
1S
H.00
HOT Temperature Upgrade Price - Increase or decrease between
2S
HOT
0 and 200 by pressing the LEFT UPPER or RIGHT UPPER key pad.
3S
Factory preset for 0 quarters = $0.00.
4S
H.00 HEAVY SOIL LEVEL Upgrade Price - Increase or decrease between
5S
HEAVY 0 and 200 by pressing the LEFT UPPER or RIGHT UPPER key pad.
6S
Factory preset for 0 quarters = $0.00.
7S
EXPLANATION
17