Philips sonicare ExpertClean 7300 Mode D'emploi page 28

28 English
2 Pull the drip tray straight out. Clean the interior of the
sanitizer with a damp cloth.
- Rinse the drip tray and wipe it clean with a damp cloth.
3 Remove the protective screen in front of the UV light bulb.
To remove the screen, grasp the edges next to the snaps,
gently squeeze and pull out the protective screen.
4 Remove the UV light bulb.
To remove the light bulb, grasp it and pull it out of the
metal clasp.
5 Clean the protective screen and the UV light bulb with a
damp cloth.
6 Reinsert the UV light bulb.
To reinsert the light bulb, align the bottom of the light bulb
with the metal clasp and push the bulb into the clasp.
7 Reinsert the protective screen.
To reinsert the screen, align the pegs on the screen with
the slots on the reflective surface near the UV light bulb.
Push the screen straight into the slots on the sanitizer.
Storage
If you are not going to use the product for an extended period
of time, unplug it from the electrical outlet, clean it and store it
in a cool and dry place away from direct sunlight.
35_021_7418_2_Booklet_A6_v2.indd 28 16/05/2019 10:08