Working With The Operating Menu - Sennheiser SK 500 G2 Notice D'emploi

Working with the operating menu

By way of example of the "TUNE" menu, this section
describes how to use the operating menu.
After switching the transmitter on, the standard display is
shown on the display panel.
Getting into the operating menu
Press the
into the operating menu. The last selected menu flashes
on the display.
Selecting a menu
Press the
Press the SET
selected menu. The current setting that can be adjusted
flashes on the display.
Adjusting a setting
Press the
By briefly pressing the
jumps either forwards or backwards to the next setting.
In the "CHAN", "TUNE" and "NAME" menu, the
rocker button features a "fast search" function. If you
hold down a button, the display cycles continuously,
allowing you to get fast and easily to your desired
setting.
16
SET button to get from the standard display
/ rocker button to select a menu.
button to get into the setting mode of the
/ rocker button to adjust the setting.
/ rocker button, the display
/