Connecting The Microphone/Line Cable; Attaching The Microphones - Sennheiser SK 500 G2 Notice D'emploi

The taking into account of the different voltage
characteristics of primary cells (batteries) and
accupacks. The battery status indications on the
displays, the transmission of transmitter battery
status information to the rack-mount receivers and
the switch-off thresholds at the end of the operating
time are corrected correspondingly. Due to the
missing sensor, individual rechargeable battery cells
will not be identified as accupacks.
The monitoring of the accupack temperature during
charging in the L 2015 charger.
The prevention of improper charging of inserted
primary cells (batteries). Due to the missing sensor,
individual rechargeable battery cells will also not be
charged in the L 2015 charger.

Connecting the microphone/line cable

The microphone/line input is designed for the connection of
both condenser microphones and instruments (e.g.
guitars). DC powering of the condenser microphones is via
the microphone/line input.
Connect the 3.5 mm jack plug
line cable to the 3.5 mm jack socket (MIC/LINE)
Lock the 3.5 mm jack plug by screwing down the
coupling ring
Via the operating menu, adjust the sensitivity of the
microphone/line input (MIC/LINE) (see "Adjusting the
sensitivity" on page 21).

Attaching the microphones

Use the microphone clips
on microphones to clothing (e.g. tie, lapel).
Adjust the ME 3 headmic so that a comfortable and
secure fit is ensured.
.
to attach the ME 2 or ME 4 clip-
from the microphone/
.
11