MOOV FI500 Mode D'emploi page 3

Thank your choosing a Moov Pool Products heat pump. Please read this
instruction manual carefully and operate strictly according to the user
manual before starting the heat pump, otherwise the heat pump may be
damaged or cause you unnecessary harm.
Special Attention:
A. This product is only for swimming pool water heating applications and
can't be used for the heating for any other liquid materials.
B. he inlet and outlet water nozzles can't bear the weight of external
pipes.
C. The main power switch should be out of the reach of children.
D. Make sure the power is switched off before opening the case.
NOTE:
A. The swimming pool heat pump must be installed by a qualified
electrician. These regulations may change depending on the Country you
live in.
B. To maximize your swimming comfort, set proper heating temperature.
. on't put obstacles near the air inlet and outlet of the heat pump.
D. This heat pump has power-off memory function.
E. When the ambient temperature is below 0 degree, make sure to switch
off the main power, and drain off the water from heat exchanger.
F. Never place your hand or any other object in the air inlet or outlet of
the heat pump.
G. If any abnormal circumstances discovered, ex: abnormal noise, smells,
smokes and leakage of electricity, switch the main power off immediately
and contact your local dealer/installer or Moov Pool Products directly. Do
not try to repair the heat pump yourself.
1