MOOV FI500 Mode D'emploi page 13

1.Power On: Press for 3 seconds to light up screen, then press
to power on heat pump.
2.Adjust Set Temperature: When screen is unlocked, press or
to display or adjust the set temperature.
3.Smart/Silence mode selection:
① Smart mode as default will be activated when heat pump is on, and
screen shows .
② Press to enter Silence mode, and screen shows .
(Suggestion: select Smart mode for initial heating.)
4.Defrosting
a. Auto Defrosting: When heat pump is defrosting, will be
flashing. After defrosting, will stop flashing.
b. Compulsory Defrosting: When heat pump is heating, press and
together for 5 seconds to start compulsory defrosting, and
will be flashing. After defrosting, will stop flashing.
(Note: Compulsory defrosting intervals should be more than 30 minutes
and the compressor should run for more than 10 minutes.)
11