Roaming - Audiovox CDM 8600 Manuel D'utilisation

CDM-8600BM7/22 2003.7.22 3:0 PM

ROAMING

ROAMING
Scans the channels to stay connected to any available
system.
SET MODE
Selects the Preferred System.
1. Press .
2. Select one of the following options (HOME ONLY/
ANALOG ONLY/AUTOMATIC) with the navigation
key, then press .
Automatic : Scans the radio channels based on the
Automatic setting.
Home Only : Only within your home area or home
affiliated area.
Analog Only : Stays in the analog setting until the
hand set is powered on after being
powered off.
FORCE ANALOG
Temporarily forces phone to use Analog mode, mode
automatically ends in 10 minutes.
1. Press .
2. Select parameters (YES/NO) by using navigation
key, then press .
Page 62 - Chapter 3
Page 64
NAM SETTING
Enables Auto NAM (Number Assignment Modules) or
manually changes a NAM.
1. Press
AUTO NAM
To automatically switch phone to the proper NAM when
you have multiple NAM registrations:
1. Press
2. Select "YES" or "NO", then press
CHANGE NAM
Changes the NAM used by the phone when you have
multiple registrations:
1. Press
2. Select a "NAM (NAM1/NAM2)" with the navigation
key, then press
NOTE:
PRL ID
Displays the phone's PRL (Preferred Roaming List):
1. Press
ROAMING
.
.
to save it.
.
to save it.
The default password is the last 4 digits of your
Phone number changed last.
.
Chapter 3 - Page 63