Loewe bild 2
Operating manual 2
Safety/Warning
Installation
Opting for an incorrect or wrongly mounted installation can lead
to danger of accidents Rolling or falling sets can cause injuries
or damage.
Loewe TV sets are specified for Loewe accessories. We strongly
recommend the use of original Loewe installation options.
Do not use any installation options that are not approved for
your TV set!
Note the instructions regarding the mounting for the different
possible installation options! A corresponding documentation
is included with every Loewe product.
Check before the installation of the set, whether the final location
with regard to the surface (pressure sensitivity) and stability
(static) is designed for the load from the set! This applies in
particular to high-gloss lacquered surfaces and surfaces made
of real wood, real wood veneer and plastic surfaces.
Only place the TV set on a levelled, stable, horizontal base with
table or stand foot! The set should especially not protrude at
the front when installing in or on furniture.
Not placing the television set on cloth or other materials that
may be located between television set and supporting furniture.
Educating children about dangers of climbing on furniture to
reach the television set or its controls.
The usual usage position of the TV set should be followed. The
TV set can only be operated horizontally upright
inclination can amount to a maximum of 10 degrees for wall
B
mounting
. The TV set must never be operated in portrait
C
orientation,
, horizontal
A
Position the set so that it is not exposed to direct sunlight and
additional heating from radiators!
Do not place the TV in a location where vibrations can arise! This
can lead to damage.
In the case of installation options for third-party manufacturers
with a motor drive, it is to be ensured that the adjustment of the
TV set does not occur manually. It is generally not advisable to
use the installation options of other manufacturers with locking
devices in certain positions.
When using accessories from third-party manufacturers, it is to
be ensured that the TV set is easily adjusted for the respective
installation option.
When adjusting the TV set, ensure that
the pressure applied to the set frame
is not too great. Especially in large
format displays, there is the danger
of damaging the display.
The mounting of a TV set on a On a holder according to the VESA
standard requires mandatory use of the VESA adapter bolts.
Otherwise, damage to the TV may result.
The Vesa adapter bolts must be attached to the TV set with a
torque of circa 4 Nm. You can obtain these from your Loewe
dealer (you can find further information found in the on-line user
handbook).
12
37163000_OM2_bild_2_43-49_1_00_ML_Buch.indb 12
37163000_OM2_bild_2_43-49_1_00_ML_Buch.indb 12
A
D
or overhead on the ceiling
±10°
E
D
B
C
Make sure that after unpacking and setting up the TV set the
packaging material (TV box, Styrofoam shells and protective
fleece) does not fall carelessly into the hands of children.
Please also note the disposal instructions for packaging and
carton (see chapter Environment/Disposal/Licences).
Supervision
Do not let unsupervised children handle the TV set nor let them
play immediately around the TV set!
The set could be knocked over, moved or pulled down from the
stand surface and injure people.
Do not leave the TV set when switched on unattended!
Volume
Loud music can lead to hearing damage. Avoid extreme sound
volume, especially over extended periods of time and when
using headphones!
Thunderstorms
During thunderstorms, pull out the mains power plug and all
connected antenna cables from the TV set!
If you have connected a network cable to the LAN port, remove
this as well!
. The
Over-voltages due to lightning strike can damage the set both
via the antenna system and via the mains power supply.
E
.
Even in the case of prolonged absence, the mains power plug
and all connected antenna cables should be disconnected from
the TV set.
Cleaning and care/chemicals
Before cleaning, switch the TV set off using the mains power
switch!
Damages caused by chemicals can lead to adverse effects and
development of fire. Never expose the set or accessories to
aggressive (for example, corrosive) chemicals such as alkalis or
acids!
Only clean the TV set, the front screen and the remote control
with a damp, soft, clean and colour neutral cloth, without any
aggressive or scouring cleaning agents!
The loudspeaker panel of your TV set is textile-covered. Hoover
the surface regularly with a soft brush attachment!
For contaminations or stains:
Moisten a soft, colour neutral cloth with detergent solution or
commercially available stain remove and rub the stain gently
away! You can also treat the stain directly with a commercial
dry stain remover spray (hoover up the dust).
Do not moisten the covering fabric directly with detergent
solution or stain remover (risk of stain circle formation)! Do not
use solvents to clean the fabric!
Note the usage instructions of the manufacturer when using
stain remover!
When cleaning loudspeaker panels which have been exposed
to nicotine, there is an increased risk of stain circle formation.
25.03.2019 08:13:45
25.03.2019 08:13:45