Moisture Condensation - Sony PS4 Guide De Sécurité

• Do not connect the AC power cord to a voltage transformer
or inverter. Connecting the AC power cord to a voltage
transformer for overseas travel or an inverter for use in an
automobile may cause heat to build up in the system and
may cause burns or a malfunction.
Never disassemble or modify the system or accessories
Use the PS4™ system and accessories according to the
instructions in the product documentation. No authorization
for the analysis or modification of the system or accessories,
or the analysis and use of its circuit configurations, is
provided. Unauthorized modification of the system or
accessories will void your warranty. There are no user
serviceable components inside the PS4™ system (the
supplied hard disk drive may be removed but not
disassembled or modified).
Additionally, there is a risk of exposure to laser radiation as
well as to electrical shock.
Network
• A broadband connection is required to access the Internet.
Note that dial-up connectivity is not supported.
• You are responsible for Internet service fees. For details,
refer to the information provided in your service contract
or contact your Internet service provider.
• Do not use a cord for a standard residential telephone line
or cables of types other than those mentioned here. Using
the wrong type of cord or cable can cause more electrical
current than necessary to flow through the LAN connector,
which may lead to heat build-up, fire or malfunction.
10
Wireless networking feature
• The frequencies used by the wireless networking feature
of this product are the 2.4 GHz/5 GHz ranges. The 2.4 GHz
range of radio waves is shared by various devices. This
product has been designed to minimize the effect of other
devices using the same range. However, in some cases
interference from other devices may reduce the
connection speed, shorten the signal range, or cause the
connection to be terminated unexpectedly.
• When using the PS4™ system's scan function to select a
wireless LAN access point, access points that are not
intended for public use may be displayed. Only connect to
an access point that you are authorized to use.

Moisture condensation

If the system or disc is brought directly from a cold location
to a warm one, moisture may condense either on the lens
inside the system or on the disc. Should this occur, the
system may not operate properly. In this case, remove the
disc and turn off and unplug the system. Do not put the disc
back in until the moisture evaporates from the system (this
may take several hours). If the system still does not operate
properly, contact SIEA Consumer Services ( back cover).