Assembly And Adjustment - Porter Cable PCE341 Manuel D'instructions

COMPONENTS (FIG. 1)
Never modify the power tool or any part of it. Damage or personal
injury could result.
Your PCE341 jigsaw has been designed for professional cutting of wood, steel,
aluminium, plastic and ceramic material.
A. On/off switch
B. Lock-on button
C. Speed control dial
D. Sawdust blower
E. Blade latch
F. Finger guard
FIG. 1
D
F
E

ASSEMBLY AND ADJUSTMENT

To reduce the risk of injury, turn unit off and disconnect it from
power source before installing and removing accessories, before adjusting or
when making repairs. An accidental start-up can cause injury.
CHECKING AND CHANGING THE SAW BLADE
• Only use saw blades conforming to the specifications contained in these
operating instructions.
• Only sharp saw blades in perfect working condition should be used; cracked
or bent saw blades should be discarded and replaced at once.
• Ensure that the saw blade is securely fixed.
• The saw blade may be hot due to usage. When changing the blade make sure
the blade is cool or wear protective gloves when touching the blade.
G. Blade holder
H. Guide roller
I. Shoe
J. Pendulum stroke selector
B
A
C
J
I
H
G
6 - ENG