Instructions For Use Applicators With 4 Chambers - Mesis Manuel D'utilisation

English

Instructions for use applicators with 4 chambers

IMPORTANT NOTE: the applicators with 4 chambers are matched to the machine Xpress Beauty,
and vary according to the configuration purchased.
1. Connect the line(s) of the connector(s) to the applicator(s) that you want to use.
Select the connector to be connected according to the applicators that you want to use:
• with the legs cuff, use the double connector (Fig. A on the next page);
• with the legs cuff and the abdominal/buttocks belt, use the triple connector (Fig. B on the next
page);
• with the single abdominal/buttocks belt, use the single connector (Fig. C on the next page);
• with the arm cuff, use the single connector (Fig. D on the next page).
Connect each nozzle (air outlet) present on the line(s) using the single, double or triple connector
to the relevant fittings present on the applicator(s) you want to use.
Spout (air outlet) on the
connector lines
When inserting the nozzles of the line(s) using the connector into the insert present on the appli-
cator (legs cuff, arm cuff, abdominal belt), it is necessary to position it on a flat and robust surfa-
ce (e.g. a table) and exert enough pressure for it to snap in and make a clicking sound.
Insert present on the applicators
IMPORTANT
User manual: Xpress Beauty
Correct insertion of the nozzle into the
insert present on the applicator. Exert
enough pressure for it to snap in and
make a clicking sound.
Press with enough pressure
for it to snap in and make a
clicking sound.
50 50