Publicité
Les langues disponibles
Les langues disponibles
User Manual
Introduction
Thank you for purchasing from the Fibre Optic Hybrid Micro-HDMI 2.0 18G Cable with Detachable HDMI
& DVI Connectors range. This product has been designed to provide trouble free, reliable operation. It
benefits from both a LINDY 2 year warranty and free lifetime technical support. To ensure correct use,
please read this manual carefully and retain it for future reference.
Lindy's range of Fibre Optic Hybrid Micro-HDMI 2.0 18G Cables with detachable connectors are the
professional solution for extending Micro-HDMI, HDMI & DVI signals over longer distances, with no
requirement for additional adapters
Package Contents
▪
Micro-HDMI Fibre Optic Hybrid Cable
▪
2 x Micro-HDMI to HDMI Connectors
▪
2 x Micro-HDMI to DVI-D Connectors
▪
USB Micro-B DC Cable (optional)
▪
Cable Pulling Tool
Features
▪
Supports HDMI resolutions up to 3840x2160@60Hz 4:4:4 8bit, with additional support HDR
▪
Supports DVI-D resolutions up to 1920x1200@60Hz
(4K@60Hz resolutions are possible if using HDMI signalling on the DVI connector)
▪
Reduced EMI and RFI
▪
Supports CEC, HDCP 2.2
Specification
▪
Power Requirements (only required if source device cannot provide sufficient power): 5V
▪
Operating Temperature: 0°C - 50°C (32°F - 122°F)
▪
Storage Temperature: -40°C - 70°C (-40°F - 158°F)
▪
Humidity:10-80% RH (non-condensing)
▪
Cable Type: Fibre Optic Hybrid (OM3 Fibre & Copper)
▪
Jacket Diameter: 6mm (0.24in)
▪
Jacket Material: PVC
▪
Colour: Black
▪
Power Consumption: 250mW
Installation
Position the Micro-HDMI connector inside
the pulling tool and close the cover.
Attach the cable tie to the pulling tool and
carefully pull from the display side. This
will be indicated on the connector head
shell.
Once installed please attach the required DVI or HDMI connector and connect to the source and display.
Switch on the source and display.
English
Publicité
