Handle Installation - Klarstein BEERSAFE 5XL Mode D'emploi

EN
34

HANDLE INSTALLATION

Pull away the door gasket in the area where the handles is to be installed.
The gasket is easily displaced by hand, no tools are necessary.
1
Insert the washer and screw into
door gasket slot, please note the
2
washer must be inside the slot and
screws pass through the door frame.
Align the handle with the screws and tighten the screws until the handle is
3 both flush and secured tightly against the door frame(DO NOT over-tighten
as this will cause damage to the handle assembly and door glass surface.
4 Restore the door gasket into its original position to finish handle installation.