ANTARION ECRANSY Manuel D'installation Et D'utilisation page 7

- Infrared receiver of the remote control
- ON / OFF button allows switching on and off.
- Source change button
- Button to decrease levels
- Menu access button
- Button to increase levels
- Button to change mode
The menu contains all the settings for the display.
Each time you press the MENU
button, you can move to the next command:
Brightness, contrast, color, format, language, reset...
The volume can be directly controlled using the 4 and 5
keys without going through the menu.
When the LED is on, the display is in standby mode. A simple press on the 1 button on the remote
control turns the display on.
If you have correctly connected the Green wire during installation, the system display in standby mode
will operate directly on the camera input corresponding to the reverse gear change.
With an optional camera, you can always have a distant view of the rear of the vehicle, and when you
shift into reverse, you can automatically switch to the camera dedicated to monitoring your
manoeuvres.
Setting the parking aid mode:
-Press the Menu button, select Park mode and make sure it is in the On position.
-Once in position On the guide lines will appear, press Menu to see the 4 modes :
H,V,W and none; in the upper left corner of the guide line.
H: left/right adjustment
V : up/down setting
W : depth adjustment
None: the guide lines are fixed
English