Beper 40.811B Manuel D'instructions page 7

Body scale Use instructions
NOTE: BEFORE USING THE SCALE, REMOVE THE PLASTIC FOIL TO ACTIVATE
LITHIUM CELLS OR THE SCALE WILL NOT OPERATE.
Key features:
High precision stain gauge sensors systems
ABS plastic platform
Capacity: 6-180kg
Division: 100 g
LCD Display
Auto on
Auto zero & Auto off
Low battery and over load indication
Free switch whitin three different units: kg/lb/st
Battery:3xAAA (not included)
OPERATION:
1-Remove the scale from the packaging
2-Turn upside down the scale paying attention, open the cover and insert 3XAAA batteri-
es, then close.
3-Place the scale on a dry and flat surface
4-Put the feet on the scale. Your weight will be displayed after some seconds, and then
the unit switch off automatically.
ATTENTION: next to the battery case you can found a switch that allow to change
the unit measures.
TO INSTALL AND REPLACE BATTERY
When the scale does not turn on anymore or the LCD shows "LO" or if does not work
correctly, that means that the battery is low. Replace it with new one.
Insert the battery in the case respecting the correct polarity.
A bad use can cause damages to the scale.
Low battery become dangerous for the possible loss of very corrosive liquid. To
avoid any damage, replace the battery as soon as necessary.
If the scale is not used for a long period, it is recommended to remove battery from
the case, in order to avoid damages with the corrosive liquid into the scale.
EVERY DAMAGES CAUSED BY BATTERY LIQUID WILL VOID THE WARRANTY.
ATTENTION:
When the display shows 'Err', it means that the limit weighing (180kg) has been overcome
Get down immediately from the scale.
This scale is for family use only and not suitable for professional use.
7