Primos Hunting AUTOPILOT 65054M Manuel D'instructions page 16

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

motion blur at night, which is more likely to occur at the 1S setting.
WHITEOUT IMAGE
If the object is too close to camera, the LED light may reflect back causing over exposure. This is
common, not a quality issue.
Dark or Light Image Quality
Primos® takes pride in the quality of images captured by the AUTOPILOT®Cam. As daylight transi-
tions back-and-forth between light and dark, the camera changes settings to optimize the picture.
Some 'lighter' or 'darker' photos may be captured during the camera transition process – this should
be a limited amount of photos with the optimization of our software. Also, please try to avoid setting
up the camera in situations where the sunlight will shine directly into camera lens. With any photo
capturing, taking pictures directly into sunlight produces less than desirable results.
EMPTY PHOTOS/FALSE TRIGGERS
If there are a large number of photos taken with no game present in the frame, first make sure your
camera is mounted the correct height and in the right direction. If there are limited, random photos
with no game present, the following scenarios are most likely 1) an animal ran through the picture
extremely fast or 2) a smaller animal/bird is around the camera/sensor but is not in the camera field
of view or 3) the sunlight or heat in combination with moving elements (trees, brush, shadows) is
causing a false trigger. The first two scenarios are hard to prevent, but the sunlight/heat should not
cause many false triggers as the camera has been optimized to sense and distinguish for correct
triggering. To prevent potential false triggers, try not to setup the camera directly in the sunlight
CAMERA DOESN'T SAVE PHOTOS/VIDEO
The SD Memory Card may be locked. Please look closely at the card and make sure the card is in the
'unlocked' position. If photos/ videos are still not saved by camera activity, the SD Memory Card may
be corrupt or damaged. You can try to reformat the card on a computer and try it again, or simply try
replacing it with a different/new SD Memory Card.
16

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Autopilot 65055m

Table des Matières