Description Of The Commands; Power Supply - THOMSON CP280 Mode D'emploi

DESCRIPTION OF THE COMMANDS

(see the description at the beginning of the manual)
Research and automatic preset stations (20 stations
1
max)/Reducing the screen brightness.
Setting the alarm time 1.
2
Setting the frequencies - / Setting the hours.
/ /
3
Pressing for 3 seconds to activate or deactivate the
4 /
RDS function.
Setting the frequencies + / Setting the minutes.
5 / /
Setting the alarm time 2.
6
Radio ON/OFF/Sleep.
7
/
ON/OFF projector.
8
9
INV Reverse projection.
10
Rotation of the projection.
ROTATE
11 Projector
12
LCD screen
13
Speaker
14 Setting the volume -/Setting the volume +.
VOLUME -/+
15
Wire aerial

POWER SUPPLY:

16
connection plug for the mains voltage adapter
17
SNOOZE Repeat alarm.
18
Battery compartment
CLOCK RADIO
CP280
POWER SUPPLY
• Before using the product for the first time, remember to
remove the plastic tab from the battery compartment.
• Only use the adaptor provided. Before using another
adaptor, check that it has the same ratings and complies
with current regulations.
CHANGING THE BACK-UP BATTERY
The back-up system ensures that the clock continues to
function in the event of a power-cut.
• Open the battery compartment on the underside of the
device.
• Insert 1 CR.2025-type (AAA) 3V battery, polarity as
indicated (+/-).
• Close the battery compartment.
USE
CR2025
3V
9 EN