Ohyama woozoo STF-DC15T Manuel D'utilisation page 8

How to use
■ How to Stop the Product
You can press the Power On / Off button to stop
the product.
Power On / Off button on the remote control.
When the power is off, the product will stop
running.
Unplug the power plug after the product stops
running.
If the Left / Right oscillating or the air circulation
fan does not face the front, the product will stop
running after facing the front. During this period,
the 3 Left / Right oscillating indicators will flash.
If the oscillating Up / Down or the air circulation fan
is not 15° downward, the air circulation fan will stop
after it is 15° downward. During this period, the
oscillating Up / Down indicator light will flash.
−15°
Front
Continue
■ Timed Power-on / off
Press the Timed Power-on button only
8
Press the Timed Power-on button, then the product
will start running after the set time.
Press the Timed Power-off button, then the product
will stop running after the set time.
You can also combine the two timers to operate the
product.
When you only press the Timed Power-on button,
please set the product to Power Off mode.
Press the Timed Power-on button, then the
indicator lights flash in the following order.
After 5 seconds from the last operation, the
indicator lights will be on and the Timed Power-on
will be enabled.
2 4 8 Hours
(Timed cancellation)
When the timed power-on is set (The indicator light
is flashing), you can also set the timed power-off,
air supply mode, oscillating Up / Down, Left / Right
oscillating, and air volume.
Each indicator light will turn on during the setting
process. After 5 seconds from the last operation,
the timed power-on indicator light is turned on and
the lights other than the timer indicator are turned
off.
After the timed power-on is enabled, the indicator
light will be switched according to the remaining
time. It will start running after the set time has
exceeded.
8 4 2 Start running
(The timed power-on indicator light is off)
Off