Using The Computer - Gregster GRG-ET-9800-iE Mode D'emploi

5. ASSEMBLY INSTRUCTIONS
STEP 6
13
12
1. Loosen the bolts (21) on the back of the computer (10). Connect the upper computer
cable (14) and the hand pulse cable (23) to the inputs located on the back of the com-
puter (10). Place the computer (10) on the computer mount. Fix the computer with the
bolts (21) removed earlier.
2. Attach the plastic covers (13 & 15) to the handlebar post (29). Secure the cover with 2
bolts (12, 20) from the back and with 1 bolt (12) from the front.
The device is then ready for use.
GRG-ET-9800-iE-IM-DE+GB+FR-05.indb 36-37
10
12
15
20
21
36

6. USING THE COMPUTER

UP DOWN
BODY START
PULSE
ENTER
FAT
RECOVERY STOP
CONTROLS/ FUNCTION
CONNECTIONS
START/STOP button • Quick start function for starting the computer without
selecting a program in manual mode.
• Stop the workout mode.
• Start the workout.
UP button • Increase the resistance level during workout.
• In setting mode: Increase the values for time, distance,
calories and age, or select a program and gender.
DOWN button
• Reduce the resistance level during workout.
• In setting mode: Decrease the values for time, distance,
calories and age, or select a program and gender.
ENTER button • In setting mode: Confirm currently entered data.
• In stop mode: Press and hold for 2 seconds to reset all values
to "0" or to default respectively.
BODY FAT button • Calculate the body fat ratio based on data to be entered.
PULSE RECOVERY button • Start the recovery pulse measurement.
REAR SIDE: A • Pulse cable input.
REAR SIDE: B • Bluetooth receiver SP-BT-BLE-100 (optional) for iOS and
Android.
A
37
20/6/2016 5:27 PM
B