Assembly Instructions - Gregster GRG-ET-9800-iE Mode D'emploi

5. ASSEMBLY INSTRUCTIONS

STEP 2
64
1. Disconnect the front plastic cover from the main housing and slide former on onto the
handle post (29).
2. Connect the Upper computer cable (14) and the Lower computer cable (65).
3. Install the handlebar post (29) on the frame (64). Secure with 6 sets of Allen head screws (9),
spring washers (5) and waved washers (8).
GRG-ET-9800-iE-IM-DE+GB+FR-05.indb 32-33
29
8
5
9
14
35
65
32
5. ASSEMBLY INSTRUCTIONS
STEP 3
6
5
4
11
22
25
1. Slide the axle (22) into the handlebar post (29). Slide one shaft washer (11) each left and
right onto the axle. Then slide the swiveling rods (24 (left), 25 (right)) onto the axle (22).
Secure each side with 2 sets of flat washers (6), spring washers (5) and Allen head screws (4).
29
11
6
5
4
25
33
20/6/2016 5:27 PM