Preparing for
inhalation
Figure 3
NOTICE:
The compressor can
only be used in con-
junction with the nebu-
liser recommended by
INQUA.
40
WARNING: Danger of electric shock
Never take hold of the power cord or the power plug for the
compressor with wet or damp hands, and do not start the
®
INQUA
Inhalator with wet or damp hands.
2
1
3
Unwind the power cord (4) on the bottom of the compressor.
Place the compressor (1) on a flat, stable surface.
Plug the power plug into the socket.
WARNING: Danger to health if connection tubings are mixed up
Check carefully to ensure that the other end of the connection tubing
connected to the compressor is attached to the nebuliser.
If several tubing systems are used for different applications at the
same time (e.g. infusion and inhalation), there is a danger that the
tubing systems may be confused. In extreme cases, this can even
result in death.
Place one end of the connection tubing (3) firmly over the air out-
let on the compressor.
Place the other end over the corresponding connector on the
nebuliser (2, see instructions for use of the nebuliser).
Assemble the nebuliser as described in the instructions for use of
the nebuliser.
Attach the mouthpiece or the mask.
Place the nebuliser in the nebuliser holder on the compressor to
fill it.
®
The INQUA
Inhalator is ready for use.
4