Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
JTX-1800:
Cut off the power first, take apart the motor
housing.
Pull out the plate and replace the carbon brush.
Maintenance and repair work beyond this is only
allowed to be carried out by the manufacturer or
authorized service staff.
Store unused equipment in a dry, locked place out
of the reach of children.
Observe the following to maintain the operability of
the machine:
1.
Keep
vent
slits
obstructions.
2.
Remove dust and dirt using a cloth or a soft
brush.
3.
Do not clean the machine with running water or
high pressure cleaners.
4.
Do not use solvents for the synthetic parts
(petrol, alcohol, etc.) as these can damage the
synthetic parts.
5.
Check that the handles are properly secured.
6.
Clean the beaters.
7.
The agitator is equipped with carbon brushes.
Have the carbon brushes be replaced by the
customer service if they are worn.
Regularly check the beater for damages for your
own safety. Immediately replace any damaged
beater. Al- ways replace the beaters in pairs.
Check the shaft on a regular basis. An agitator with
defective shaft must no longer be used. Have the
de- vice be repaired by the customer service.
7.0 Storage
1.
The whole machine and all accessories must be
thoroughly cleaned.
2.
Store the machine always out of children's
reach. Put it in a secure position in a dry and
safe place where no extremely high or
extremely low temperatures may occur.
3.
Protect the stored machine from direct sunlight;
put it in a darkened area, if feasible.
4.
Do not wrap the machine into bags or covers
made of nylon or plastic, as dampness may
develop.
8
clean
and
free
from
Publicité
Chapitres
Table des Matières
