Calex PyroCouple M Série Guide De L'opérateur page 2

PyroCouple M Series, non-contact infrared sensors, measure temperatures from -20°C to 500°C
and provide either a linear 4 to 20mA output a voltage output, or a thermocouple output. This range
of output signals is compatible with almost any indicator, controller, recorder, data logger etc.,
without the need for special interfacing or signal conditioning. They are suitable for most materials
such as food, paper, textiles, plastics, leather, tobacco, pharmaceuticals, chemicals, rubber, coal
and asphalt; but not materials with a low emissivity, for example polished metals.
Specification
Temperature Range vs Field-of-View table
Field of View
2:1
15:1
30:1
ø5mm @ 100mm PCMCFLT-X
Output table
Model-X
-0
-1
-2
-3
-4
-5
General
accuracy
repeatability
emissivity
response Time, t90
Spectral range
Power
Max. loop Impedance
Output Impedance
MECHANICAL
Construction
Dimensions
Thread Mounting
Cable length
Weight with Cable
ENVIRONMENTAL
environmental rating
ambient Temperature range
relative Humidity
acceSSorieS
A range of accessories to suit different applications and industrial environments is available. These
may be ordered at any time and added on-site. The accessories consist of the following parts .
Fixed mounting bracket
Laser sighting tool
›
2
-20ºC to 100ºC 0ºC to 250ºC
PCM21LT-X PCM21MT-X
PCM151LT-X PCM151MT-X
PCM301LT-X PCM301MT-X
PCMCFMT-X
Output
4-20 mA
0-50 mV
Type T thermocouple
Type J thermocouple
Type K thermocouple
0-5V
±1% of reading or ±1°C whichever is greater
±0.5% of reading or ±0.5°C whichever is greater
Fixed at 0.95
240 ms (90% response)
8 to 14 µm
24 V DC (13 V DC to 28 V DC max)
750 Ω (4-20 mA output)
56 Ω (voltage/thermocouple output)
Sensing head
Stainless Steel
18 mm dia. x 45 mm long
M16 x 1 mm pitch
1 m
205 g
IP65
0°C to 70°C
95% max. non-condensing
Adjustable mounting bracket
Portable calibration checker
0ºC to 500ºC
-
PCM151HT-X
PCM301HT-X
PCMCFHT-X
electronics Module
Die-cast Aluminium
98mm x 64mm x 34mm
Air purge collar