Life & Mobility ORMESA Novus Mode D'emploi page 78

HOW TO FIX THE 891 TIEDOWN (4 RINGS) ON THE FRAME
2)
ATTENTION:
suitable for ISO 10542- and SAE
-
J2249 approved four-point straps
provided in the vehicle. To anchor
the stroller to the transport vehicle,
see the instructions on page 11
the child must wear both a lap belt
-
and a diagonal
ANSI/RESNA WC/19- or ISO 10542-
approved (i.e., belts with a label of
conformity to these standards).
Postural belts, such as models 817,
868, 828, 853, 894, 903 and 906 are
not approved for use as restraint
systems and can only be used in
addition
the vehicle must be suitable for
-
transporting orthopaedic strollers
in conformity with current law
- read the notices and instructions
provided on page 9 of this use and
maintenance manual. The 891 tie
down hooks are safety devices and,
as such, they must be fixed to the
frame by skilled personnel, such as
the manufacturer or reseller that
supplied the stroller
PLASTIC
BUSHING
HEX WRENCH
SCREW M8X55
NUT M8
shoulder belt
NUT M8
WRENCH
NUT M8
VIEW FROM BEHIND
WRENCH
11 / 60
SCREW M8X40
HEX WRENCH