Intended Use; Items Supplied - Hilti SFC 22­A Mode D'emploi

Torque and drilling mode se-
;
lector ring
2-speed gear selector switch
=
Forward / reverse selector
%
switch with safety lock
Control switch (with electronic
&
speed control)
Grip
(
Lamp
)
Belt hook (optional)
+
Release buttons with addi-
§
tional function (charge status
display activation)
Charge state and fault display
/
(Li-ion battery)

3.2 Intended use

The product described is a hand-held cordless drill/driver. It is designed for
driving and removing screws and for drilling in steel, wood and plastic.
▶ Use only Hilti Li-ion batteries of the B18 / B22 series with this product.
▶ Use only the Hilti battery chargers of the C4/36 series for these batteries.
3.3 Charge status display
The charge status of the Li­ion battery is displayed after pressing the release
button.
Status
4 LEDs light up.
3 LEDs light up.
2 LEDs light up.
1 LED lights up.
1 LED blinks.
Battery charge status cannot be displayed while the control switch is
pressed.

3.4 Items supplied

Drill / driver, operating instructions.
• You can find other system products approved for use with your product
at your local Hilti Center or online at: www.hilti.group.
*2153703*
Printed: 18.09.2019 | Doc-Nr: PUB / 5293248 / 000 / 03
Meaning
Charge status: 75 % to 100 %
Charge status: 50 % to 75 %
Charge status: 25 % to 50 %
Charge status: 10 % to 25 %
Charge status: < 10 %
2153703 English 7